Maintenance & Repairing

Mold Maintenance & Repairing | Integrated Solutions

Mold Repair

Injection Mould Repairing

On-site | Off-site [In House] repairing of all kinds of mould | Injection Mold (Hot & Cold Runner) | Blow Mold  by our skilled technician and mould flow analyst. Our effort  and quality work not only save your time but also cost.

Rubber Injection Mold | Plastic Injection Mould | Helmet Mould | Food Container Mold | Paint Bucket Mould | Hot Runner Mould | Cold Runner Mold.


Fixture Maintenance

Fixture | Jigs for every purpose ~Machining , Hydraulic , Robotic and many more  will be taken care of by our skilled TR experts. Our Team is loaded with all kinds of latest equipment and NextGen Machines for handling this job work.

Jig- Fixtures | Hydraulic Fixture | Panel Checker | Machining Fixture | Robotic Welding Fixture | Receiving Gauge.

Rubber Mold

Rubber Mold Maintenance

rubber mold maintenance

Compression | Transfer | Injection

As we know damage mould can cause problem with rubber product and to insure good quality rubber products we have to repair and maintain mould periodically.  

Compression molding: is often used for medium- to high-volume production of rubber parts, such as gaskets, seals, and grommets.

Transfer molding: is often used for more complex rubber parts, such as those with intricate features or tight tolerances.

Injection molding: is the fastest and most efficient rubber molding process, and it is often used for high-volume production of rubber parts.

mold maintenance
Mold Maintenance Work

Mold Maintenance in house facility! We are equipped with all tools and techniques to repair and take care of all kinds of mold. We can also repair imported Molds where 3D data not available.

Below are the steps we follow to repair and maintain rubber mould: 

Clean the mold. Clean the area around the tear or hole in the mold with mild soap and water. Be sure to remove any dirt, oil, or debris.

Apply a release agent. Apply a release agent to the area around the tear or hole. This will help to prevent the adhesive from sticking to the mold.

Mix  & Apply the adhesive. Mix the two parts of the rubber mold adhesive according to the manufacturer’s instructions. If manufacturer’s data not available then we design 3d data for the mould to repair.

Apply a thin layer of the adhesive to the edges of the tear or hole. Be careful not to get any adhesive on the inside of the mold cavity.

Clamp the mold closed. Clamp the mold together so that the tear or hole is closed. Be sure to use clamps that are large enough to hold the mold together tightly, but not so tight that they damage the mold.

Allow the adhesive to cure. Allow the adhesive to cure according to the manufacturer’s instructions.

Remove the clamps. Once the adhesive has cured, remove the clamps.

  • If the tear or hole is large, you may need to patch it with a piece of rubber. To do this, we cut a piece of rubber that is slightly larger than the tear or hole. Apply a thin layer of adhesive to the back of the patch and to the area around the tear or hole. Place the patch over the tear or hole and clamp the mold closed. Allow the adhesive to cure completely before removing the clamps.
Die Casting Mould

Casting Mold Maintenance

Maaintenance needs attention , study data, understang of mould design and its work. We not only fulfil the maintenance work but also we repair casting mould even if mould data not avaialble.

Repairing and Spare of Casting Mould

Casting mould for maintanence
Injection Mold Repairing
Big Mould die By Integrated Solutions7
Rainwater Harvesting Part Mould

Sheet Metal Tool Maintenance

As we know sheet metal tools are essential for a variety of industries, including automotive, aerospace, and construction.

Her we cover main areas where we need repair of sheet metal tools.

  • Wear and tear: Sheet metal tools are subjected to a lot of wear and tear during normal use. This can be caused by friction, heat, and stress. Over time, this can lead to wear on the cutting edges, bending dies, and other components of the tool.
  • Damage: Sheet metal tools can also be damaged by accidents or improper use. This can include dropping the tool, hitting it with another object, or using it to work on materials that are too hard or too thick.
  • Corrosion: Sheet metal tools can also corrode over time, especially if they are exposed to moisture. This can weaken the tool and make it more susceptible to damage.

Injection Mould Repairing

On site Mould repairing and Maintanence by skilled mould fitter .

mold repair1
Mold maintaanence

Rubber Mould

Taking care of all types of rubber mould and its repairing

Plastic Injection Mould

Plastic Injection Mould

Repair and Maintanence of all types of plastic injection mould and its parts.

Sheet Metal Tools

All Types of Sheet Metal Tools are repaired and maintained . On site and Off site facility availabe .

Need Help With Easier Industrial Solutions? We Are Experts!